A worksheet introducing students to measurement using engineering tools. First section describes the methods used to measure using the micrometer, the second section describes measurement using the vernier scale. Both sections are complete with some sample activities to test the students knowledge. I would use the worksheet along with the actual measuring tools so the students can handle the equipment as they work, this will reinforce their learning. It will be helpful for a teacher who already knows how to read both scales to teach as it will require some explanation to support the work.

Manual handling information and lesson resources. Produced for low level engineering students, includes information and questions relating to manual handling in the workshop environment. Please feel free to cut, past and chop anything you want for your own purposes.

PPT presentation about manual handling methods focused towards engineering activities. There are no additional files as the ones I used are freely available on the HSE website, though there are several single/group work activities that can inspire students to put thought into what they are doing. Used to teach students in preparation for the City & Guilds level 3 in engineering externally assessed exam, with excellent results in previous years. Though it has been made with engineering students in mind, the nature of the subject make it ideal for pretty much any subject. As with all other health and Safety subjects, don't forget to check out the HSE website - that place really has helped me to teach health and safety over the years. Please feel free to copy, paste and chop down any part of the resource you want.

Crossword puzzle including answer key - used in engineering lessons to teach age 14-16 students.

A pack of 5 general engineering starter activities for use in Engineering lessons. These have been made for level 1/2 students and each one will help to build vocabulary as well as developing knowledge of certain terms when the teacher goes through answers. Included with each of the 5 puzzles is an answer sheet. All puzzles have been provided as a PDF. Stay tuned for more puzzles and quizzes as we progress through the academic year.

PPT that summarises the basics behind what to do in the event of electrocution in industry, primarily engineering. I use this throughout the BTEC and City & Guilds engineering courses that I teach at levels 2 and 3. Please feel free to cut, paste, chop and change any part of this resource you want to in order to meet your own needs.

Basic H & S quiz, can be used as a starter for new students to an engineering course. Please feel free to chop and change any of the questions to suit your courses.

40 Slide powerpoint resource detailing the theory behind Limits and Fits used in engineering, design and manufacture. Age range of resource - 14 - 19 (GCSE to Sixth Form) Studying BTEC/City and Guilds/AS/A level Ideal for students learning topics like measurement, engineering, technology and other technical subjects. Slides have animations to emphasise the functions of certain fits, which provide a visual appeal to the presentation. Feel free to cut, chop and paste the slides as you see fit in order to meet your own needs.

Aimed at year 12 Level 2 City and Guilds Engineering students studying unit 202. Briefly covers Melting points of metals, Density, Colour, Magnetism, Corrosion resistance, Conductivity and Insulation 18 slide Presentation to be used along with questions sheet - ideal for cover teaching. Calculations can be added for stretch and challenge students, these are easily found in any textbooks or a quick web search. Takes between 1 - 2 hours dependant on depth of teaching.

A 22 slide presentation on the subject of linear measurement. The content focuses on the engineering/technology/design side of measurement but will be appropriate for students of all areas that simply need a lesson in measuring. Ideal for a cover lesson if a teacher is away from work. Covers many types of measuring from using rulers through to micrometers, vernier callipers and laser measurement. Feel free to cut, chop and paste any of the slides and any of the content/design to suit your own purposes.

Three powerpoints and a word document that describe the processes of power generation and the methods that are used in order to send it around the country. Useful for a cover teacher or as introductory sessions into the subject of electricity and power. Appropriate for all ages, each set of slides uses descriptions and images to show its respective topic. The Battery Cell Construction document is for information or revision but could be used as a basis for activities if required. Please feel free to cut, chop and paste anything from the resources to suit your own needs.

6 presentations and a document that cover the importance of renewables energy development. Explained as an introductory pack of presentations which are designed to inform a whole range of ages. Ideal for a cover teacher or as an introduction to the world of renewables. Useful in all areas from 8 to 19 (Good for BTEC, City and Guilds, GCSE subjects and more) The solar power document is designed to be used for revision but could be repurposed to create activities and quizzes. All of the presentations are easily editable and could be used for a wide variety of lessons. Feel free to cut, chop and paste anything you like from the slides or document in order to meet your personal needs.

Slides that test students recall of the main safety signs that are displayed in every aspect of life. The main signs are: Prohibitive Mandatory Warning First aid Safety These questions are ready to go right out of the box but might also be useful in many other subject areas. You can quite easily change the questions and answers if you wanted to use it for other areas of work. Please feel free to Cut, paste or change anything you wish to meet your needs.

Aimed at year 12 City and Guilds Engineering Students/BTEC students studying Engineering. Research activity that focuses on properties of materials. I taught with a discussion and then a computer research session (using the hand-out) followed by a Q/A session for assessment.

4 individual Starter activities for Engineering/DT courses. Suitable for year 10 up, these starters are a good way of engaging students and assessing prior knowledge. I have used them on both BTEC and City and Guilds engineering courses. Ready to use - just print them and away you go. Areas covered - Machining, (Resistant) Materials, Material properties and manual handling (health and safety)

A powerpoint presentation that shows how measurements are tolerance in engineering, technology and design. A few questions are included in the slides but more can be easily made by using the examples as a template. Used at the start of engineering measuring activities or before you introduce students to a practical activities in an engineering or design environment. Feel free to cut, chop and paste any of the slides as you see fit for your own purposes.

Lots of information about how plastics are formed, what they are used for and what they are made from. Designed for use with 6th form students - but if theres anything that I need from the presentation I generally cut it out and use for a specific lesson. Feel free to cut and paste anything you want from the presentation to meet your needs.

Lots of information about metallic structures (at a microscopic level) I use this by cutting out the information that I need for a class and producing my handouts etc. from there. Feel free to cut, chop and paste anything you want from the resource.